Default gateway not available

8 Ways to Fix “The Default Gateway is Not Available” Error in Australia

4 Mins Read

PUREVPN8 Ways to Fix “The Default Gateway is Not Available” Error in Australia

Internet issues can be incredibly frustrating and one problem Windows 10 users commonly face is “the default gateway is not available” error. If you’re facing the same problem and have no access to the internet, you might be wondering how to fix it.

Don’t worry! Below, we’ll discuss what you can do if the default gateway is not available on Windows 10:

How to Fix “The Default Gateway is Not Available” Error

You can try the following solutions to solve the infamous error and regain internet access:

Solution #1: Disable and Enable Your Network Adapter

Disabling and enabling your Network Adapter usually fixes the issue. Just follow these simple steps:

  1. Click the Start menu.
  2. Go to Settings.
  3. Select Network & Internet.
  4. Click Change adapter options.
  5. Right-click the network adapter you’re using and choose Disable.
  6. Wait a few seconds.
  7. Right-click again on the disabled network adapter and select Enable.

Solution #2: Reset the TCP/IP Stack

If the problem still persists, resetting the TCP/IP stack should do the trick. Just follow these simple steps:

  1. Press the Windows and R keys together to open the Run window.
  2. Type cmd in the box and click the OK button. The command prompt window will open.
  3. Type the following commands one by one and don’t forget to hit Enter after each of them:

netsh int ip reset
netsh winsock reset
ipconfig /flushdns

  1. Close the command prompt.
  2. The error may go away, but if not, restart your PC and try to connect to your network again.

Solution #3: Disable Automatic Login

In some cases, the Windows auto login feature causes the error and disabling it will work for you. Just follow these simple steps:

  1. Press the Windows and R keys.
  2. In the Run window, type netplwiz and click OK.
  3. A User accounts window will be displayed.
  4. Check the “Users must enter a username and password to use this computer” box and click Apply.
  5. Restart your computer and enter your password at the login screen.
  6. Try to connect to your network again.

Solution #4: Remove McAfee or other Antivirus

Antivirus programs like McAfee can sometimes conflict with your network configuration. If you use McAfee to protect your computer from threats, removing it will fix the issue. Just follow these simple steps:

  1. Click the Start menu.
  2. Go to Settings.
  3. Select Apps > Apps & Features.
  4. Find McAfee and click it to expand it.
  5. Click the Uninstall option.
  6. Click Uninstall again to confirm.

Once you uninstall McAfee, your PC will be protected by Windows Defender Antivirus. However, you can also install a different third-party antivirus program.

Default gateway not available

Solution #5: Set Wireless Mode to 802.11g

If you’re still getting “the default gateway is not available” error, changing your wireless mode to 802.11g might solve it. Just follow these simple steps:

  1. Open the Start menu.
  2. Click Settings.
  3. Select Network & Internet.
  4. Now, click Change adapter options.
  5. Right-click your network adapter and choose Properties.
  6. In the Properties window, click the Configure button.
  7. Go to the Advanced tab.
  8. Select 802.11g from the list and set the Value to Enabled.
  9. Hit the OK button and check if the issue is solved.

Solution #6: Change Your Router’s Wireless Frequency

Most new router models use the 5 GHz frequency, but your existing adapter might not support it. In this scenario, you’ll have to change your router’s wireless frequency to 2.4 GHz. The steps for doing so will vary depending on which router you have, so make sure to check your router’s manual for detailed instructions. Once done, check whether or not you can connect to the internet once again.

Solution #7: Disable Power Management

Windows 10 comes with a feature known as Power Management that disables certain drivers to conserve power. However, this can sometimes disable the drives permanently or cause them to malfunction. To disable the feature, just follow these simple steps:

  1. Type Device Manager in the search box.
  2. Double-click the Network Adapters option.
  3. Right-click the network card you’re using and select Properties.
  4. Go to the Power Management tab.
  5. Uncheck the “Allow the computer to turn off this device to save power” box and click OK.

Solution #8: Enable Maximum Performance for the Wireless Adapter

If all else fails, your last resort is to configure your wireless adapter to use the Maximum Performance setting. Just follow these simple steps:

  1. Type Power & sleep settings in the search box.
  2. Under Power and sleep, click Additional power settings.
  3. Click Change plan settings.
  4. Now, click Change advanced power settings.
  5. Locate the Wireless Adapter Settings and set the Plugged in option to Maximum Performance.
  6. Hit the Apply and OK buttons to save the changes.

Frequently Asked Questions

How Do I Find the Default Gateway on My Router?

If you want to find your router’s default gateway, the easiest way is to use the command prompt. Just follow these simple steps:

  1. Press the Windows and R keys.
  2. Type cmd and hit the OK button.
  3. In the command prompt window, type the ipconfig command.
  4. Your default gateway will be listed next to Default Gateway.

Learn how to find your default gateway on different devices here.

How Do I Fix Multiple Default Gateway Errors?

Just follow these simple steps:

  1. Press the Windows and R keys.
  2. Type ncpa.cpl and hit the OK button.
  3. In the Network Connections window, right-click on your network adapter and select Properties.
  4. Double-click the Internet Protocol (TCP/IP) option and click Advanced.
  5. If you can see multiple default gateways listed, remove them as they cause connectivity issues.
  6. Restart your PC and see if the issue is resolved.

Fix the “The Default Gateway is Not Available” Error with These Solutions!

Following the troubleshooting tips mentioned above should help you get rid of the error. Let us know in the comments section which solution worked for you.

Have Your Say!!

Join 3 million+ users to embrace internet freedom

Signup for PureVPN to get complete online security and privacy with a hidden IP address and encrypted internet traffic.