Table of Contents
Your computer is connected to the internet, but you’re unable to open any web pages. You check the WiFi icon in the system tray and notice a small yellow triangle icon. “Hmm, that’s odd,” you say to yourself. You click it and see the “No Internet, secured” message, which indicates an issue with your (secured) wireless connection or configuration.
The error can be quite frustrating, but it’s relatively easy to deal with and get back online. In this article, we’ll discuss what you can do if you’re facing the “No Internet, secured” problem on Windows 10.
The “No Internet, Secured” error on Windows 10 occurs when your computer is connected to a WiFi network but cannot access the Internet despite having a secured connection. The message implies that the WiFi network is secured with encryption, ensuring data privacy, but an issue prevents your computer from establishing a connection to the internet.
Depending on your computer setup and network card, there are several solutions available to fix this error. We’ve listed major ones below:
Windows 10 has a useful Network Troubleshooter that automatically checks for issues and even repairs them. Here’s how to use it:
If you’re using a Windows VPN, its built-in security features can be the reason behind the “No Internet, Secured” message. The kill switch is the most likely culprit as it’s designed to terminate your internet connection in case the VPN server goes down.
To see if this is the issue, disconnect your VPN and exit the client entirely. Wait a few seconds until you reconnect to the internet and visit a frequently updated website, such as a news portal.
If everything loads up properly, then the VPN server was causing the problem. Update your VPN software if possible and try a different VPN server. If you’re able to access the internet once it connects, the issue is fixed.
Still facing the “No Internet, Secured” problem? One of the easier solutions is to refresh the Windows 10 IP configuration. This will assign your computer a new IP address and fix the issue if it was caused due to invalid IP allocation. Here’s how to go about it:
ipconfig /release
ipconfig /renew
Once you’ve executed these commands properly, the error will hopefully be gone. If not, move on to the next solution.
Resetting Winsock is another command line fix to the “No Internet, Secured” message. Winsock refers to the Windows Sockets API, which controls how your PC communicates with network services, such as the commonly used TCP/IP. Just follow these steps to reset Winsock:
netsh winsock reset catalog
Wait a moment for the network to reconnect automatically. If it doesn’t, do so manually and check if the problem is resolved.
Still no luck? If so, check if your connection properties are configured correctly. Here’s what you’ll have to do:
Once done, click the OK button to confirm and restart your PC when prompted.
IPv6, the latest Internet Protocol version, is designed to eventually replace the current IPv4 as the latter has run out of IP addresses. However, not all networking hardware supports IPv6. If you have this enabled, it can interfere with your connection. In this scenario, disabling IPv6 should do the trick. Just follow these instructions:
Related Read: IPv4 vs IPv6: What’s The Difference Between Them?
If the “No Internet, Secured” error hasn’t disappeared yet, the issue might be your network adapter’s drivers. If you suspect this is the problem, it’s worth updating to the latest drivers. Here’s how to do that:
If your computer doesn’t automatically connect to the network, select Disable device and restart your computer. Then Enable device again and see if it fixes the issue.
In some instances, the “No Internet, Secured” error can appear because of your antivirus – it might be interfering with your network connection. This problem is prevalent with Comodo antivirus, so if you’re using it, removing it is worth a shot. Just follow these instructions:
Once you remove Comodo, your computer will be protected by Windows Defender. However, you can also install another third-party antivirus program.
There are specific reasons why you might encounter the ‘no internet secured’ error in Windows 10. Let’s have a look:
Encountering the “No Internet, Secured” error message does not indicate that your device is infected with malware. This error typically relates to connectivity issues between your device and the WiFi network rather than directly resulting from malware.
However, while the error itself is not a sign of malware, malware or malicious software can potentially cause disruptions to your network connectivity. Malware might alter network settings, interfere with communication, or redirect your internet traffic.
If you suspect a malware infection, you should look for other signs of malware, such as unusual behavior, unwanted programs, unauthorized access and security warnings.
For the no internet-secured error, focusing on troubleshooting is a better option. If the error is due to slow internet speed or improper port management, a reliable VPN, such as PureVPN, could be a solution.
Also, after accessing all possibilities, if you think the error is due to any malware or unauthorized access, you must opt for PureVPN for your secure access to the internet in future.
By now, you must have fixed the issue already and would be thinking how easy it was. If you are still not through, try connecting to another network, as sometimes, there is no problem with the communication but the network itself.
Follow these simple steps to enjoy secure browsing!