Table of Contents
VideoReQuest is a powerful video analysis tool that allows users to search for and analyze online videos. It provides users with a variety of features including the ability to search for videos by keyword, topic, or location. Users can also use VideoReQuest to analyze videos by frame, identify people and objects in videos, and track video activity over time.
Port forwarding is a technique that is used to allow external devices access to computers on a private network. This is done by redirecting traffic from the public network to the private network. It is perfectly safe if you understand what you’re doing and take precautions. However, if you don’t understand what you’re doing, it can be very dangerous. Before you port forward, you should understand what is being requested of you and if you are comfortable doing it. You should also make sure that your router is secure and that you have a good firewall in place.
To port forward VideoReQuest, you will need to follow the steps mentioned below.
Just before you begin with the process of Port Forwarding, make sure you have the following things:
Now that you have the above details noted down, you can move to the next stage of VideoReQuest Port Forwarding:
The ports that need to be forwarded for VideoReQuest are as follows:
TCP Port: | 22, 2992, 3670 |
UDP Port: | 22, 2992, 3670 |
Opening a port shouldn’t be complicated. With the Port Forwarding add-on, it’s as simple as 1, 2, and 3!
Ports to run on PC:
TCP Port: | 22, 2992, 3670 |
UDP Port: | 22, 2992, 3670 |
What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router.
To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle.
Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.
Open Ports Behind CGNATTo most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.
Secondly, you won’t always be able to open VideoReQuest ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.
Well, you can eliminate all these problems and enjoy smooth online gaming on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.
You will need to follow these steps:
To port forward an RTSP port, you will need to follow these steps:
After following these steps, your RTSP port should be successfully forwarded.
To open port 7777 on your router, you will need to log in to your router’s web interface and locate the port forwarding section. Once you have located the port forwarding section, add a new rule for port 7777 and save your changes. After saving your changes, you should be able to access your router’s web interface on port 7777.