Table of Contents
Helium routers are a game-changer for IoT connectivity, providing a decentralized wireless network for long-range connections. These Hotspots allow users to earn cryptocurrency by offering coverage for IoT devices.
However, getting the most out of your Helium Hotspot can be challenging – especially when it comes to configuring port forwarding. For this reason, we’ve put together the ultimate guide to mastering port forwarding on your Helium Hotspot.
In this guide, we’ll walk you through everything you need to know to get started, from all the requirements to setting up your router to configuring port forwarding for seamless IoT connectivity.
So, whether you’re a seasoned tech pro or just starting out, read this guide to learn everything you need to know to get the most out of your Helium Hotspot.
The following is the step-by-step process you’ll need to follow to set up port forwarding on Helium Hotspot:
If you follow these steps correctly, you should be able to set up port forwarding on your Helium router. You can repeat these steps for any additional ports or range of ports you want to forward.
The following are some common ports to know for Helium router port forwarding:
Note that these ports are commonly used, but your specific needs may vary based on the application and devices you use. Remember to consult your application’s or device’s documentation to determine which ports you need to forward.
Manually setting up port forwarding on your Helium router can be a daunting task, which may require you to learn the entire process. This isn’t practical as you may need to relearn the processes, port information, and requirements each time you switch devices or applications. With PureVPN’s port forwarding add-on, you can configure your Helium router’s port forwarding settings within a few minutes – if not seconds.
Here’s how it works:
Carrier Grade Network Address Translation [CGNAT] is a technology that ISPs [internet service providers] use to share a single IP address among multiple users. It can make it difficult to forward ports, which may be necessary for some applications to function efficiently.
CGNAT makes it difficult for the ISP’s network to know where to send the incoming data. And since the Helium network uses decentralized architecture, port forwarding can be particularly tricky for you.
The devices on this network communicate directly rather than through a central server. To enable port forwarding, your Helium router must use a technique called “hole punishing” to establish direct communication between devices when they are behind different CGNATs.
Confused by all of this technical jargon? Click the link below to make port forwarding easy for yourself.
Port forwarding can be a complex process, and it can be even more challenging with CGNAT. However, you can simplify the process with the help of PureVPN’s port forwarding add-on.
The add-on allows you to access your router’s settings from anywhere, enabling you to create new port forwarding rules or pause existing ones. Moreover, it provides the same efficiency level as a networking expert, allowing you to easily forward, block, and allow ports on your router.
Click the link below to learn how to enable port forwarding for your Helium router, which is necessary to establish direct communication between devices on its decentralized network.
To verify whether or not your Helium Hotspot is behind a CGNAT, check its public IP address. If the IP address starts with 10,172, or 192, it is likely behind a CGNAT.
Yes, you can port forward on your Helium Hotspot, even if it’s behind a CGNAT, using a technique called “hole punching.” This technique establishes direct communication between devices on the Helium network. Alternatively, you can skip all the technical steps and use PureVPN’s port forwarding add-on.
The ports you need to forward on your Helium Hotspot depend on the specific device or application you’re using. Check the documentation of your application or device to determine which ports you should forward.
Yes, you can use third-party software to manage port forwarding on your Helium Hotspot. PureVPN’s port forwarding add-on is one of the most reliable tools for this task. It allows you to configure your router settings and forward ports from anywhere and for multiple devices.
Yes, you need to open the same port on both your Helium Hotspot and your device to establish direct communication between them.
Port forwarding is a crucial aspect of establishing direct communication between devices on the Helium network, and mastering it can significantly improve your IoT connectivity. With the right tools and knowledge, you can easily configure port forwarding on your Helium Hotspot, overcome the challenges of CGNAT, and ensure seamless communication between your devices.
Don’t rely on manual configuration when you can benefit from PureVPN’s port forwarding add-on! Use it today to experience its advantages yourself.