Table of Contents
This guide will enable you to port forward the Edgerouter X successfully. We require open ports for a better internet experience. By port forwarding, we mean getting access to specific servers on a private network.
Here, we will explain the process step-by-step. By the end, you can access servers behind the firewall or router, NAT, or CGNAT. The guide is specifically for Ubiquiti Edgerouter X servers, read more to know.
Before you move forward with port forwarding, make sure you have the following:
After you have the information mentioned above, follow the steps below to enable ports on the Edgerouter X successfully:
Edgerouter X runs on a few ports, which you can enable on your firewall. The default Edgerouter X ports are:
TCP Port: 443, 8080, 8880
UDP Port: 3478, 5514, 5656-5699
You can always check the router user manual to know more about port settings or take the help of a customer representative if these ports do not work for you.
With the PureVPN port forwarding add-on, opening ports has become easy and efficient. You can enjoy local, remote, and dynamic port forwarding.
If your ISP (internet service provider) uses CGNAT, opening ports can be a problem for you. ISPs perform CGNAT to limit their bandwidth and sometimes to ensure a fair usage policy. They assign the same IP address to many users, which can slow down your speed. But here is a solution! PureVPN port forwarding add-on is what you need to surpass CGNAT restrictions.
If you are hosting a game server, running remote desktop protocol, or using torrents, port forwarding is your need. Every router has a different process that could keep you dragged.
Also, if you are using Edgerouter X, you can be a victim of ISP, as they block ports. Even your firewall can block some ports. This can be quickly taken care of! PureVPN port forwarding add-on is just a click away from bypassing all restrictions.
With its intuitive management interface, Edgerouter X provides a virtual view of the ports. If you use it with the exclusive PureVPN port forwarding add-on, the overall internet experience is improved. If you need assistance regarding any PureVPN services, we are available to help.
Yes, the Edgerouter X gateway is already forwarding the port to another device or has UPnP enabled. You can follow our guide above to easily port forward Edgerouter but check the ports first that you want to forward.
If incoming traffic is not reaching the WAN interface of your gateway, try disabling UPnP in your Network Application’s Internet Settings. Most likely, the traffic is blocked by ISP modem/router or a third-party firewall.
Forwarding ports is essential when you are barred by your ISPs for certain activities like playing games, hosting servers, or getting access to specific ports. Limiting your bandwidth is a common practice of ISPs which is difficult to bear sometimes.
When you forward ports you get access to some servers, which you were not allowed to access before. This is important for people who need to view specific ports or play games.
You can forward fifteen ports simultaneously.
If you are a subscriber of PureVPN, there is no need to forward ports manually.
Yes, it is possible if you use PureVPN’s port forwarding add-on.