How to Port Forward Edgerouter X

This guide will enable you to port forward the Edgerouter X successfully. We require open ports for a better internet experience. By port forwarding, we mean getting access to specific servers on a private network.

Here, we will explain the process step-by-step. By the end, you can access servers behind the firewall or router, NAT, or CGNAT. The guide is specifically for Ubiquiti Edgerouter X servers, read more to know.

Requirements for Edgerouter X

Before you move forward with port forwarding, make sure you have the following:

• Downloaded and installed the Edgerouter X server
• The IP address of your router.
• The IP address of your device.
• TCP and UDP port numbers. 

Simple steps to configure port forwarding on Edgerouter X

After you have the information mentioned above, follow the steps below to enable ports on the Edgerouter X successfully:

1. Type your router’s IP Address/Default Gateway on your web browser address bar.
2. Log in with your router’s credentials to view your router’s firmware settings.
3. Search for the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your device. 
6. Put the TCP and UDP ports of the Edgerouter X in the boxes in your router. The default Edgerouter X port number is 443. 
7. Click the apply button.
8. Restart your router.

Edgerouter X ports needed to run

Edgerouter X runs on a few ports, which you can enable on your firewall. The default Edgerouter X ports are:

TCP Port: 443, 8080, 8880

UDP Port: 3478, 5514, 5656-5699

You can always check the router user manual to know more about port settings or take the help of a customer representative if these ports do not work for you.

Unblock ports safely with PureVPN 

With the PureVPN port forwarding add-on, opening ports has become easy and efficient. You can enjoy local, remote, and dynamic port forwarding.

How to access ports behind CGNAT

If your ISP (internet service provider) uses CGNAT, opening ports can be a problem for you. ISPs perform CGNAT to limit their bandwidth and sometimes to ensure a fair usage policy. They assign the same IP address to many users, which can slow down your speed. But here is a solution! PureVPN port forwarding add-on is what you need to surpass CGNAT restrictions.

1. Login to the PureVPN member area.
2. Click the subscription tab.
3. Click Configure.
4. Apply your desired port settings.
5. Click Apply settings.

PureVPN’s port forwarding add-on: A secure solution for unblocking ports

If you are hosting a game server, running remote desktop protocol, or using torrents, port forwarding is your need. Every router has a different process that could keep you dragged.

Also, if you are using Edgerouter X, you can be a victim of ISP, as they block ports. Even your firewall can block some ports. This can be quickly taken care of! PureVPN port forwarding add-on is just a click away from bypassing all restrictions.

Concluding thoughts

With its intuitive management interface, Edgerouter X provides a virtual view of the ports. If you use it with the exclusive PureVPN port forwarding add-on, the overall internet experience is improved. If you need assistance regarding any PureVPN services, we are available to help.

Frequently Asked Questions