Table of Contents
Port forwarding, also known as port management, allows internet traffic to efficiently and quickly pass to a specific application or computer. It’s a networking technique that enables a gateway or similar devices to transmit all incoming traffic or communication of a particular port to the same port on an internal network mode.
Port forwarding can be used for various reasons, including network security, speed, and efficiency. In this article, we will walk you through everything you need to know to port forward a DrayTek router and also introduce you to a method for bypassing CGNAT to unlock a port. So, keep reading.
You’ll need your router’s IP address to log into its web interface and login credentials to access the router’s admin page. The following are all the general steps you’ll need to follow:
If you followed all the steps correctly, you would have successfully port forwarded a DrayTek router. However, you can contact DrayTek ’s support team or review its user manual if you’re facing issues.
The following are some of the many ports that DrayTek routers use to offer network services:
While most routers typically use these standard ports, it’d be best to visit the manufacturer’s website or refer to your router’s user manual to confirm.
You can use PureVPN to unblock ports and make the process of opening ports on your routers stress-free and straightforward.
Most ISPs (internet service providers) perform CGNAT (Carrier-Grade NAT) to save internet bandwidth and share the same IP address among multiple users on the same network. While this benefits your ISP, it makes opening ports on your router a little trickier.
But don’t worry; you can easily use PureVPN’s port forwarding add-on to unlock ports hidden behind CGNAT. This add-on will better equip you to configure port forwarding on any router like a pro and avoid hindrances caused by CGNAT. Here’s how the add-on works:
Port forwarding is tricky even for the most tech-savvy people. It can be more challenging if your router’s interface is difficult to use and you can’t find an appropriate manual or when certain firewalls or your ISP is blocking specific ports.
However, you can avoid all the technical hassle with a simple, user-friendly, and highly efficient port forwarding add-on by PureVPN.
This add-on will take the complicated technical work off your hands and enable you to easily, quickly, and successfully allow, block, and open all the ports you want.
You can also use PureVPN to hide your IP address from your ISP to prevent getting blacklisted for attempting to bypass CGNAT.
You can port forward your router as long as you have access to a computer or a mobile device connected to your network, your router’s IP address, login credentials for the router’s web interface, and port numbers used by your router.
To enable port forwarding on your router, log into your router’s web interface via a computer or mobile device connected to your network. Next, set a port forwarding rule for a specific device and save changes.
You can port forward with PureVPN and enable its port forwarding add-on to make the process safer, more efficient, and more secure.
You should use your router’s default IP address for port forwarding. Enter the IP address into the browser’s search bar and then log into the router’s web interface using the default credentials to set up a port forwarding protocol.
You can use port forwarding to preserve public IP addresses, protect clients and servers from unwanted access, hide servers and services on a network, and restrict access from and to a network. It adds a layer of protection to networks and is transparent to the end user.