How to Port Forward Ground Control with Chat Rooms

Ground Control with Chat Rooms is a throttling tactical game, which was released in 2000. But, don’t forget to open ports on your router to keep a stable connection. This guide explains how you can port forward Ground Control with Chat Rooms in a few minutes. 

How to Port Forward Fortnite on PlayStation 4 

To start, you will need to log into your PlayStation 4 and go to the Settings menu. From here, look for the Network section and select the View Connection Status option. Once you are on this screen, note down any information listed under IP Address or Default Gateway.

Next, you will need to find your router’s IP address. This can usually be found on a sticker on the back or under the router, and you will also want to note down any login credentials associated with it. Once you have this information, open up a web browser and type in your router’s IP address into the address bar. This will take you to your router’s control panel, where you can find a section for port forwarding.

Here, you will need to create a new rule that allows traffic on specific ports to be forwarded over to your PlayStation 4. You will need to enter the IP address of your PlayStation and specify which ports you want traffic  to be sent to. Be sure to save your changes and try playing Fortnite again to see if the issue has been resolved.

Requirements to Port Forward Ground Control with Chat Rooms

Just before you begin with the process of port forwarding, make sure you have the following things:

• Downloaded and installed the Ground Control with Chat Rooms.
• The IP address of your router.
• IP address of your gaming device.
• TCP and UDP ports of Ground Control with Chat Rooms for your gaming device as mentioned in the section below.

Step-by-step guide on how to port forward Ground Control with Chat Rooms

Now that you have the above details noted down, you can move to the next stage of Ground Control with Chat Rooms port forwarding:

1. On your web browser address bar, type your router’s IP Address/Default Gateway.
2. Log in with your router’s credentials (username and password) to view your router’s firmware settings.
3. Navigate to the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your gaming device in your router in the correct box.
6. Put the TCP and UDP ports of the Ground Control with Chat Rooms server in the boxes in your router. The default Ground Control with Chat Rooms port number is 15001. And then click the apply button.
7. And you’re done. Restart your router to let the changes take effect.
8. Once your changes take effect, now you can open ports for Ground Control.

Ground Control with Chat Rooms ports needed to run

To play Ground Control with Chat Rooms online and create a server without any interruptions, you’ll have to allow access to certain ports on your firewall. The default Ground Control with Chat Rooms ports are:

TCP Port:	15001, 15101, 15200, 20000-21000, 25000-25499
UDP Port	20000-21000

Quickly and safely open ports using PureVPN

Opening a port shouldn’t be complicated. With the Port Forwarding add-on, it’s as simple as 1, 2, and 3!

How to open ports behind CGNAT

What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router. 

To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle. 
Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.

PureVPN’s Port Forwarding Add-on

A secure way to open all ports

To most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.

Secondly, you won’t always be able to open Ground Control with Chat Rooms ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.

Well, you can make all these problems go away and enjoy smooth online gaming on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.

How to Port Forward Telstra 

There are a few different steps you will need to follow when port forwarding on Telstra router. First, you will need to find the IP address of your computer or device that is connected to your home network. Next, you will need to locate the ports that you want to open and enter them in the port forwarding settings on your  Telstra router.

Once you have finished these steps, your device will be able to accept connections from outside of your home network. This can allow you to play games or use services on your computer like a printer or media server even when you are not at home!

Frequently Asked Questions 

How do I improve online connectivity? 

One of the best ways to improve your online connectivity is to use high-speed internet. High-speed internet, or broadband internet, is a type of connection that transmits data much more quickly than a dial-up modem. This allows you to load websites, stream movies and music, and download files much faster than with a standard connection.

Another way to improve your online connectivity is by using a reliable wireless router. Wireless routers allow you to access the internet through a range of devices, such as your smartphone, tablet, or laptop. This gives you more flexibility and convenience, and can help ensure that you always have fast and reliable internet access.

How do I host a Minecraft server with port forwarding? 

When you host a Minecraft server using port forwarding, you need to set your firewall to allow inbound connections on the ports listed below. If you’re having issues with allowing inbound connections, try setting up a virtual private network (VPN) or scanning your computer for viruses or spyware that may be blocking your connection.