Dragino Miner Port Forwarding

Dragino Miner is a free and open-source LoRaWAN indoor gateway. It is an 8-channel gateway, as opposed to the LG01-P single-channel gateway, implying a more significant number of nodes can be connected to it. Thus, it can easily manage significantly more significant LoRa traffic.

A USB host port and a USB type C power input are included in the device and are powered by an SX1308 LoRa concentrator and two 1257 LoRa Transceivers. 

Moreover, it features an ethernet port that might be used to connect to the internet. On the front of the gateway are four status LEDs for the power supply, Ethernet port, WiFi Access Point, and internet connectivity.

We may use this gateway to connect a LoRa wireless network to a network using Ethernet or WiFi. The Semtech Packet Forwarder is used in the LPS8 and is entirely compliant with the LoRaWAN standard. 

This gateway’s LoRa concentrator has 10 customizable parallel demodulation routes and includes standard LoRaWAN frequency bands that may be utilized in various countries.

A few of the characteristics of the LPS8 LoRaWAN gateway include:

• It’s an OpenWrt system that’s free to use.
• 49x LoRa demodulators are emulated.
• Ten parallel demodulation pathways may be programmed.

Dragino Hotspots would mine HNT through packet transmission and are classified as a Data Only Hotspot. Mining to HNT is presently impossible with other devices except for Approved Hotspots. 

Make sure that your Dragino is connected to the internet while also being updated to the recent firmware before setting it for working with the Helium network.

Port Forwarding by Dragino Miner:

You wouldl want to set the following ports on your network for forwarding 2 ports before running the miner:

44158/TCP:

This port is used by the miner for communicating with other Miners.

1680/UDP:

Without this, you would be unable to send packets or participate in Proof of Coverage.

When configuring port forwarding, you’ll need the IP address of your device to which the port should be forwarded.

Dynamic Host Configuration Protocol (DHCP) is a protocol used by network routers and firewalls for assigning internal IP addresses to devices joining the network as required from all present addresses. This implies that a device might be assigned a new local IP address each time it is connected to your network.

This issue can be resolved by either set a fixed IP address in the miner to ensure that the IP address is always the same or reserving an IP address reservation in the route so that whenever you join the network, you are permanently assigned the same IP address.

Port Forwarding using VPN:

Incoming data can get over your NAT firewall with VPN port forwarding, which speeds up the internet speed. VPN is usually used to forward ports since it is helpful for various purposes. 

It can boost the internet speed, provide remote access to the machine, and establish a direct connection with the server.

You can open ports on the opposite side of the tunnel with several VPN providers. Moreover, users can connect to the endpoint IP address and not the actual IP address of the computer, even when in a remote connection. 

No user can access your physical device this way, and all data transferred across the secure tunnels is protected.

Using a VPN for Port Forwarding protects the data and devices from the dangers that standard routers would expose them to, like hacking, data theft or corruption, and viruses.

Compared to port forwarding on a physical router, setting up a VPN is quite simple. 

Nevertheless, not all VPN providers enable Port Forwarding. Furthermore, each VPN provider’s Port Forwarding method is different.

Whereas each scenario is unique, we always recommend using a VPN. The few advantages of Port Forwarding pale compared to the substantial dangers of accessing the internet without effective encryption. 

Moreover, a premium VPN service can provide an unrivaled degree of protection and anonymity, which could even speed up the internet speed without using Port Forwarding.

Conclusion

A VPN is the best way to set up Port Forwarding for Dragino Miner. We hope that this guide will help you understand all the steps in a better way.