How to Port Forward Citrix Netscaler

Port forwarding helps you access the client’s server behind the router or firewalls, NAT or CGNAT. You can open ports and control devices behind any router. This guide explains how to port forward Citrix Netscaler.

Requirements to Port Forward Citrix Netscaler

Just before you begin with the process of port forwarding, make sure you have the following things:

• Downloaded and installed the Citrix Netscaler server.
• The IP address of your router.
• IP address of your device.

TCP and UDP ports of Citrix Netscaler for your device as mentioned in the section below.

Step-by-step guide on how to port forward Citrix Netscaler

Now that you have the above details noted down, you can move to the next stage of Citrix Netscaler port forwarding:

1. On your web browser address bar, type your router’s IP Address/Default Gateway.
2. Log in with your router’s credentials (username and password) to view your router’s firmware settings.
3. Navigate to the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your device in your router in the correct box.
6. Put the TCP and UDP ports of the Citrix Netscaler server in the boxes in your router. The default Citrix Netscaler port number is 9091. And then click the apply button.
7. And you’re done. Restart your router to let the changes take effect.
8. Once your changes take effect, now you can host a Citrix Netscaler server and let your friends connect to it as well. To let them connect to it, you need to provide them the hostname you are using, along with the port number. For example, ‘hostname.domain.com:25565’.

Citrix Netscaler ports needed to run

To access Citrix Netscaler online and create a server without any interruptions, you’ll have to allow access to certain ports on your firewall. The default Citrix Netscaler ports are:

TCP Port:	9091, 9092, 9094

Quickly and safely open ports using PureVPN

Opening a port shouldn’t be complicated. With the Port Forwarding add-on, it’s as simple as 1, 2, and 3!

Ports to forward on devices

Ports to run on PC:

TCP Port:	9091, 9092, 9094

How to open ports behind CGNAT

What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router. 

To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle. 
Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.

PureVPN’s Port Forwarding Add-on

A secure way to open all ports

To most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.

Secondly, you won’t always be able to open Citrix Netscaler ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.

Well, you can eliminate all these problems on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.

Frequently Asked Questions

Is it safe to port forward on a PC?

Yes, it is completely safe to port forward on a PC as long as you have a security firewall or a VPN connection on your computer. 

How to port forward on a hotspot? 

To port forward on a hotspot, you need to follow these steps:

1. Log in to the router’s web-based interface.
2. Find the Port Forwarding section.
3. Add a new rule for the ports you want to open. 
4. Save your changes and restart the router for the changes to take effect.