Table of Contents
Shoutcast is a streaming media service that uses its own cross-platform software to stream digital audio content, primarily in MP3 or High-Efficiency Advanced Audio Coding format, to media players. This guide explains how to port forward Shoutcast.
Requirements to Port Forward Shoutcast
Just before you begin with the process of port forwarding, make sure you have the following things:
- Downloaded and installed the Shoutcast server.
- The IP address of your router.
- IP address of your device.
TCP and UDP ports of Shoutcast for your device as mentioned in the section below.
Step-by-step guide on how to port forward Shoutcast
Now that you have the above details noted down, you can move to the next stage of Shoutcast port forwarding:
- On your web browser address bar, type your router’s IP Address/Default Gateway.
- Log in with your router’s credentials (username and password) to view your router’s firmware settings.
- Navigate to the port forwarding section of your router.
- Click on Port Forwarding.
- Enter the IP address of your device in your router in the correct box.
- Put the TCP and UDP ports of the Shoutcast server in the boxes in your router. The default Shoutcast port number is 8000. And then click the apply button.
- And you’re done. Restart your router to let the changes take effect.
- Once your changes take effect, now you can host a Shoutcast server and let your friends connect to it as well. To let them connect to it, you need to provide them the hostname you are using, along with the port number. For example, ‘hostname.domain.com:25565’.
Shoutcast ports needed to run
To use Shoutcast online and create a server without any interruptions, you’ll have to allow access to certain ports on your firewall. The default Shoutcast ports are:
| TCP Port: | 8000-8001 |
| UDP Port: | 8000-8001 |
Quickly and safely open ports using PureVPN
Opening a port shouldn’t be complicated. With the Port Forwarding add-on, it’s as simple as 1, 2, and 3!
Ports to forward on devices
Ports to run on PC:
| TCP Port: | 8000-8001 |
| UDP Port: | 8000-8001 |
How to open ports behind CGNAT
What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router.
To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle.
Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.
PureVPN’s Port Forwarding Add-on
A secure way to open all ports
To most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.
Secondly, you won’t always be able to open Shoutcast ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.
Well, you can eliminate all these problems on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.
Frequently Asked Questions
How to port forward on a hotspot?
To port forward on a hotspot, you need to follow these steps:
- Log in to the router’s web-based interface.
- Find the Port Forwarding section.
- Add a new rule for the ports you want to open.
- Save your changes and restart the router for the changes to take effect.
Is port forwarding a good idea?
Port forwarding is a great method of keeping public IP addresses safe. By doing so, it can safeguard servers and clients from unapproved access, as well as “hide” the services and servers available on a network. Additionally, port forwarding limits accessibility to and from a network.
