How to Port Forward Rome Total War

Rome: Total War is a game that was released in 2004 by Creative Assembly. The game is set in the Roman Republic and lets you play as one of three families – Julii, Scipii, or Brutii. You can also play as the Egyptian, Carthaginian, or Macedonian factions.

To play Rome: Total War online, you need to have a game server. The game servers are run by players who have opened up their ports and allowed others to connect to them. This guide will explain how to port forward Rome: Total War so that you can play online with friends.

Requirements to Port Forward Rome Total War

Just before you begin with the process of port forwarding, make sure you have the following things:

• Downloaded and installed the Rome Total War server software package hosted.
• The IP address of your router.
• IP address of your gaming device.
• TCP and UDP ports of Rome Total War for your gaming device as mentioned in the section below.

Step-by-step guide on how to port forward Rome Total War

Now that you have the above details noted down, you can move to the next stage of Rome Total War port forwarding:

1. On your web browser address bar, type your router’s IP Address/Default Gateway.
2. Log in with your router’s credentials (username and password) to view your router’s firmware settings.
3. Navigate to the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your gaming device in your router in the correct box.
6. Put the TCP and UDP ports of the Rome Total War server in the boxes in your router. The default Rome Total War port number is 3783. And then click the apply button.
7. And you’re done. Restart your router to let the changes take effect.
8. Once your changes take effect, now you can host a Rome Total War server and let your friends connect to it as well. To let them connect to it, you need to provide them the hostname you are using, along with the port number. For example, ‘hostname.domain.com:25565’.

Rome Total War ports needed to run the game

To play Rome Total War online and create a server without any interruptions, you’ll have to allow access to certain ports on your firewall. The default Rome Total War ports are:

TCP:	3783, 6500, 6515, 6667, 13139, 18321, 27750, 27900, 28900, 29900-29901
UDP:	6515, 8871, 13139, 18321, 27750, 27900

Quickly and safely open ports using PureVPN

Opening a port shouldn’t be complicated. With the Port Forwarding add-on, it’s as simple as 1, 2, and 3!

Ports to forward on devices

Ports to run on Windows/PC

TCP:	3783, 6500, 6515, 6667, 13139, 18321, 27750, 27900, 28900, 29900-29901
UDP:	6515, 8871, 13139, 18321, 27750, 27900

How to open ports behind CGNAT

What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router. 

To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle. 

Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.

PureVPN’s Port Forwarding Add-on

A secure way to open all ports

To most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.

Secondly, you won’t always be able to open Rome Total War ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.

Well, you can make all these problems go away and enjoy smooth online gaming on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.