How to port forward Age of Mythology

Can’t port forward Age of Mythology?

Port forwarding creates a direct line of communication with external servers and networks when you are playing online FPS or MMO games. If you wish to connect to Age of Mythology servers from your private network, consider port forwarding. You can learn how to open ports for Age o Mythology and the step-by-step guide in this blog.

Age of Mythology Port Forwarding Explained

If you haven’t port forwarded a router before, all you have to do is follow the steps mentioned below.

Requirements to Port Forward Age of Mythology

Just before you begin with the process of port forwarding, make sure you have the following things:

• The IP address of your router.
• IP address of your gaming device.
• TCP and UDP ports of Age of Mythology for your gaming device as mentioned in the section below.

Step-by-step guide on how to port forward Age of Mythology

Now that you have the above details noted down, you can move to the next stage of Age of Mythology port forwarding:

1. On your web browser address bar, type your router’s IP Address/Default Gateway.
2. Log in with your router’s credentials (username and password) to view your router’s firmware settings.
3. Navigate to the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your gaming device in your router in the correct box.
6. Put the TCP and UDP ports of the Age of Mythology server in the boxes in your router. The default Age of Mythology port number is 5060. And then click the apply button.
7. And you’re done. Restart your router to let the changes take effect.
8. Once your changes take effect, now you can connect to Age of Mythology.

Age of Mythology ports needed to run

To play Age of Mythology online and create a server without any interruptions, you’ll have to allow access to certain ports on your firewall. The default Age of Mythology ports are:

• TCP: 5060-5061
• UDP: 5060

Quickly and safely open ports using PureVPN

Opening a port shouldn’t be complicated.

Open Ports Now

Ports to forward on devices

Ports to run on Windows

• TCP: 5060-5061
• UDP: 5060

How to open ports behind CGNAT

What if your ISP performs CGNAT? Most ISPs perform CGNAT (Carrier-grade Network Address Translation) to conserve bandwidth and assign a single IP address to multiple users connected to the same internet network. However, CGNAT makes it difficult for you to open ports on the router. 

To get around the CGNAT issue, you can use the Port Forwarding add-on to bypass this problem and port forward routers without hassle. 

Here’s more information on how to use PureVPN’s Port Forwarding add-on and bypass CGNAT in a few clicks.

Open Ports Behind CGNAT

PureVPN’s Port Forwarding Add-on

A secure way to open all ports

To most people, port forwarding is quite a demanding task. For starters, every router has a different console, which often makes it difficult to navigate to specific settings.

Secondly, you won’t always be able to open Age of Mythology ports on your router if your ISP restricts the ports. Yes, you heard that right! ISPs are notorious for blocking ports due to security reasons. If ISP isn’t the reason behind a blocked port, then perhaps it could be your operating system’s firewall.

Well, you can make all these problems go away and enjoy smooth online gaming on all your desired systems with PureVPN’s Port Forwarding add-on. Through the Port Forwarding add-on, you can allow all ports, disallow all ports, and allow specific ports.

How to Port Forward Optus Routers

If you want to port forward on your Optus router, there are a few things you need to do. First, check if your router is compatible with port forwarding. If it is, then find out what the default IP address, username and password are. Once you have that information, go to the Port Forwarding section of the router’s web interface and add a new entry. Make sure to enter the correct port number, protocol (TCP or UDP), and IP address. Once you’re done, save your changes and reboot the router. That’s it! Your port forwarding should now be working.

Frequently Asked Questions

How do I port forward TCP UDP?

NAT (Network Address Translation) is a technology most commonly used by firewalls and routers to allow multiple devices on a LAN with ‘private’ IP addresses to share a single public IP address. Port forwarding is a technique used to allow remote access to services that are hosted behind a NAT firewall.