How to port forward Ubiquiti router

This guide will enable you to port forward the Ubiquiti router successfully. We require open ports for a better internet experience. By port forwarding, we mean getting access to specific servers on a private network.

Here, we will explain the process step-by-step. By the end, you can access servers behind the firewall or router, NAT, or CGNAT. The guide is specifically for Ubiquiti servers; read more to know.

Requirements for Ubiquiti router

Before you move forward with port forwarding, make sure you have the following:

• Downloaded and installed the Ubiquiti server.
• The IP address of your router.
• The IP address of your device.

Simple steps to configure port forwarding on Ubiquiti router

After you have the information mentioned above, follow the steps below to enable ports on the Ubiquiti router successfully:

1. Type your router’s IP Address/Default Gateway on your web browser address bar.
2. Log in with your router’s credentials to view your router’s firmware settings.
3. Search for the port forwarding section of your router.
4. Click on Port Forwarding.
5. Enter the IP address of your device. 
6. Put the TCP and UDP ports of the Ubiquiti Unifi server in the boxes in your router. The default Ubiquiti Unifi port number is 443. 
7. Click the apply button.
8. Restart your router.

Ubiquiti ports needed to run

Ubiquiti runs on a few ports, which you can enable on your firewall. The default Ubiquiti ports are:

TCP Port: 443, 8080, 8880

UDP Port: 3478, 5514, 5656-5699

You can always check the router user manual to know more about port settings or take the help of a customer representative if these ports do not work for you.

Unblock ports safely with PureVPN 

With the PureVPN port forwarding add-on, opening ports has become easy and efficient. You can enjoy local, remote, and dynamic port forwarding.

How to access ports behind CGNAT

If your ISP (internet service provider) uses CGNAT, opening ports can be a problem for you. ISPs perform CGNAT to limit their bandwidth and sometimes to ensure a fair usage policy. They assign the same IP address to many users, which can slow down your speed. But here is a solution! PureVPN port forwarding add-on is what you need to surpass CGNAT restrictions.

PureVPN’s port forwarding add-on: A secure solution for unblocking ports

If you are hosting a game server, running remote desktop protocol, or using torrents, port forwarding is your need. Every router has a different process that could keep you dragged.

Also, if you are using Ubiquiti routers, you can be a victim of ISP, as they block ports. Even your firewall can block some ports. This can be quickly taken care of.

PureVPN port forwarding add-on is just a click away from bypassing all restrictions.

Frequently Asked Questions

Does Ubiquiti UniFi allow port forwarding?

Yes, the UniFi Gateway is already forwarding the port to another device or has UPnP enabled.

Why is Ubiquiti port forwarding not working? 

If incoming traffic is not reaching the WAN interface of your gateway, try disabling UPnP in your Network Application’s Internet Settings. Most likely, the traffic is blocked by ISP modem/router or a third-party firewall.

When should you use port forwarding?

Configuring a router for port forwarding becomes essential when you have to play games without any restrictions from ISPs. ISPs block ports to manage their bandwidth, making it a frustrating experience for you.

What happens when you forward ports?

Forwarding ports refer to sending permissions to get access to servers. Some servers are not open to everyone, so the malicious traffic is controlled. That is why when you port forward to gain access to the specific server you wish to connect to.

How many ports can be forwarded simultaneously?

Fifteen ports can be forwarded simultaneously.

Do I still need to forward the ports manually from my router?

No, if you are a subscriber of PureVPN, you don’t need to do that.

Will port forwarding allow me to access my camera’s web server remotely?

Yes, the PureVPN port forwarding feature enables you to access the camera’s web server remotely.