port forwarding linksys smart wifi router

The Ultimate Guide on Linksys Smart WiFi Router Port Forwarding

5 Mins Read

PUREVPNPort ForwardingRouterThe Ultimate Guide on Linksys Smart WiFi Router Port Forwarding

Linksys Smart Wi-Fi routers are a line of routers produced by Linksys, a division of Cisco Systems, Inc. These routers are designed to provide users with a high-speed wireless Internet connection and advanced features such as parental controls, network prioritization, and remote management via a web-based interface. 

port forwarding linksys smart wifi router

If you have a Linksys Smart Wi-Fi Router, you can easily set up port forwarding using the router’s web interface. By forwarding ports, you can enable access to certain applications and services from outside your network, such as hosting a website or accessing a remote desktop.

It is important to note that port forwarding can pose a security risk if not properly configured, so it is important to understand the importance of using a VPN like PureVPN.

In this article, we’ll guide you about port forwarding on Linksys smart WiFi routers. We’ll cover all the steps. Plus, we’ll even hook you up with some tips on how to make it even easier with the PureVPN add-on that can help you bypass CGNAT. So, let’s dive in and get your ports open for business.

What to collect before you get started with Port Forwarding on Linksys smart WiFi router 

  • First up, you need to know the default IP address of your router. 
  • Next, you’re going to need a static IP address for the device you want to forward ports. 
  • You’ll also need to know the TCP/UDP port numbers and protocols for the services you want to access. 
  • Last but not least, you need to know the username and password to access your router. 

Steps to set up port forwarding on Linksys smart WiFi router 

Follow these steps to set up port forwarding on your Linksys smart wifi router:

  • First off, open up a browser on your computer that’s connected to your router. 
  • Next, type in the router’s default IP address (usually 192.168.0.1) into the address bar. This will take you to your router’s settings page.
  • Now, it’s time to log in. Just enter the username and password (usually “admin” and “password” if you haven’t changed them).
  • Alright, almost there. Now navigate the Security tab, then go to the Apps and Gaming tab.
  • Next, click on Single Port Forwarding and add a new one. Here’s where you’ll enter all the details like the application name, external and internal port numbers, device IP#, and protocol. Make sure to check the Enabled box too.
  • You’re almost done. Just click Save and then Apply to finish up.

Here are some of the most common ports that your Linksys smart wifi router may use:

  1. Port 80 – This is the default port used for HTTP traffic, which is web browsing.
  2. Port 443 – This is the default port used for HTTPS traffic, a secure version of HTTP commonly used for online banking, shopping, and other sensitive transactions.
  3. Port 21 – This is the default port used for FTP (File Transfer Protocol) traffic, which is used for uploading and downloading files to and from servers.
  4. Port 22 – This is the default port used for SSH (Secure Shell) traffic, a secure way to remotely access and manage your router or other devices.
  5. Port 23 – It is the default port used for Telnet traffic, an older way to remotely access and manage your router or other devices.
  6. Port 3389 -It is for Remote Desktop Protocol (RDP) traffic, which allows you to remotely access and control your computer from another device.

Grab the PureVPN port forwarding add-on to set up port forwarding fast

If the manual process of setting up port forwarding on your Linksys smart wifi router seems like a big pain, no worries! You can use the PureVPN port-forwarding add-on instead. You don’t need any networking or technical knowledge to use it, and you can set up port forwarding on any router from anywhere! 

Here’s what you need to do:

  • Log into the member area of PureVPN
  • Go to the Subscription tab
  • Navigate to Configure
  • Choose the required port settings
  • Click Apply Settings

Your solution to accessing and forwarding ports behind CGNAT

Your internet service provider (ISP) may use CGNAT to save IPv4 addresses. This can make it hard for you to access or forward ports on your router. Devices behind CGNAT don’t have a public IP address, so they can’t be reached from the internet. 

Instead, your router gets a private IP address from your ISP’s network, which gets translated to a public IP address before going onto the internet.

Setting up port forwarding on a CGNAT gateway can be a pain and may need extra configurations. Plus, some ISPs don’t let you make port forwarding rules on the CGNAT gateway, or they might make you pay extra money.

So, what’s the best solution? Click on the link below to find out!

The easiest solution for port forwarding with PureVPN’s addon 

If you’re experiencing difficulties in configuring port forwarding on your router due to CGNAT, there’s a reliable and straightforward solution available. PureVPN’s port forwarding add-on enables you to effortlessly access, forward, allow, or block all necessary ports with just a few clicks. 

Moreover, the add-on enables you to manage your router’s settings and establish or halt port forwarding rules, regardless of your location or internet connection. 

To explore the benefits of combining PureVPN with the port forwarding add-on, follow the link below.

Final Words

So there you have everything you need to know about setting up port forwarding on your Linksys Smart wifi Router. You learned about the requirements, the steps, and some common ports. If you still find it all too complicated, just try the PureVPN add-on for port forwarding.

Frequently asked questions

How can I find my device’s private IP address on my Linksys smart wifi router?

To find your device’s private IP address on your Linksys Smart Router, all you gotta do is log into its web interface and head over to the “Connected Devices” section. You’ll see a list of all the connected devices and their private IP addresses right there.

Can I set up multiple port forwarding rules on my Linksys smart wifi router?

Yes, you can set up multiple port forwarding rules on your Linksys Smart wifi Router. But you need to make sure to specify different external ports for each rule. It’s like giving each rule its unique fingerprint.

How do I verify that my port forwarding rule works on my Linksys smart wifi router?

You can try using an online port scanner tool or simply connect to the forwarded port from a device outside your network. That way, you’ll know if your rule is up and running.

How can I configure my device’s firewall settings to allow incoming traffic on the forwarded port?

To allow incoming traffic on the forwarded port of your Linksys Smart wifi Router, you gotta set up an inbound rule in your device’s firewall settings that allows traffic on the specified port.

What are common port forwarding problems, and how to troubleshoot them?

Sometimes port forwarding on your Linksys smart wifi router may not work as expected. This can be because of several reasons, such as messed up firewall settings, port forwarding rules interfering with each other, or even some incorrect IP addresses.
But you don’t need to worry; you can easily troubleshoot these issues by checking your router’s logs and testing your connection through an online tool.

Have Your Say!!

Join 3 million+ users to embrace internet freedom

Signup for PureVPN to get complete online security and privacy with a hidden IP address and encrypted internet traffic.